NSN 5910-00-104-0142 · NIIN 001040142 · FSC 5910
NO DASHES 5910001040142
In Stock
CAPACITOR,FIXED,ELECTROLYTIC
Capacitors
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AARF | MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR | N-1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.000 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.286 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.275 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.156 |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.170 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AECE | ANODE TYPE | SOLID |
| AECQ | ELECTRICAL POLARIZATION | NONPOLARIZED |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 34.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| CQLH | DC LEAKAGE AT MAXIMUM OPERATING TEMP | MILLIAMPERES 30.1 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 2.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -20.00 TO 20.00 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 10.0000 |
| CWQH | DC LEAKAGE AT REFERENCE TEMP | MICROAMPERES 1.500 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| MATT | MATERIAL | CASE PLASTIC |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 94756-441-1031 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |