NSN 5905-00-411-9544 · NIIN 004119544 · FSC 5905
NO DASHES 5905004119544
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAT | BODY WIDTH | INCHES NOMINAL 0.190 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.0 |
| AXGY | MOUNTING METHOD | TERMINAL |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| AEDX | SHAFT STYLE | |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES NOMINAL 0.200 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.420 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.375 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -250.0 TO 250.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22097 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22097 TO 4 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.172 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.125 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.080 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.100 |