NSN 4430-01-530-7978 · NIIN 015307978 · FSC 4430
NO DASHES 4430015307978
In Stock
OVEN,THERMAL DRYING,ELECTRIC
Industrial Furnaces, Kilns, Lehrs, and Ovens
Application: OVEN, DRYING, WALK-IN
Technical characteristics
9 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | SERIAL NUMBER IS 411931 (2001); 1 RECIRCULATING BLOWER WHEEL (FORWARD CURVE, 18IN DIAMETER, CC ROTATION, CARBON STEEL, 1-5/16IN BORE); 1 SHAFT (1-15/16IN DIAMETER X 28IN LONG, 1/2IN X 1/4IN KEY SEAT, 4-1/2IN LONG AT ONE END 3IN LONG ON THE OTHER END); 2 BEARINGS (NP-31, 1-15/16IN DIAMETER BORE PILLOW BLOCKS); 1 HEAT SLINGER (1-15/16IN DIAMETER BORE); 1 MOTOR SHEAVE (2BK40 X 1-1/8IN DIAMETER BORE); 1 SHAFT SHEAVE (2B68Q W/ Q1 BUSHING, 1-15/16IN DIAMETER BORE); 2 BELTS (5L400 "V" BELTS); 4 HINGES (FORGED STEEL STRAPS 21IN LONG); 2 LATCHES (EXPLOSION VENTING P3); 2 HANDLE (31-8); 1 EXHAUSTER BLOWER WHEEL (FORWARD CURVE WHEEL, 12IN DIAMETER, 2-1/2IN DEEP, CARBON STEEL, CW ROTATION, 1-1/2IN LONG HUB OUT, 5/8IN BORE); 1 HEAT SLINGER (5/8IN BORE); 1/2IN ON 48 FRAME MOTORS; PAINT/INTERIOR IS ALUMINIZED STEEL; PAINT/EXTERIOR IS TRILITE GREEN MACHINERY ENAMEL; GASKET IS FIBERGLASS TADPOLE |
| FAAZ | PHASE | THREE |
| BHGT | CIRCULATION METHOD | FORCED |
| CBBL | FEATURES PROVIDED | FLOODLIGHT |
| ELEC | VOLTAGE IN VOLTS | 460.0 |
| AGAV | END ITEM IDENTIFICATION | OVEN, DRYING, WALK-IN |
| ACDC | CURRENT TYPE | AC |
| TMDN | TYPE/MODEL DESIGNATION | WRC566-750 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| WRC566-7E4 | 90423 |
| S/N 411931 (2001) | 90423 |