NSN 5305-00-273-6263 · NIIN 002736263 · FSC 5305
NO DASHES 5305002736263
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| CMLP | THREAD QUANTITY PER INCH | 11 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.505 |
| ASXK | HOLE QUANTITY | 6 |
| BQDM | HOLE TYPE | DRILLED |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.616 AND INCHES MAXIMUM 0.625 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.061 AND INCHES MAXIMUM 0.067 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.625 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.750 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 2.000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.921 AND INCHES MAXIMUM 0.937 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 43.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 130000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| AAJD | THREAD CLASS | 3A |