NSN 3110-00-887-6350 · NIIN 008876350 · FSC 3110
NO DASHES 3110008876350
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYE | SURFACE FINISH | GROUND |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 5P |
| LBMA | LUBRICATION MATERIAL | OIL LUBRICATING |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-L-6085 |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| AGVV | OUTER RING OUTSIDE DIAMETER | INCHES MINIMUM 0.1873 AND INCHES MAXIMUM 0.1875 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.0771 AND INCHES MAXIMUM 0.0781 |
| AGZD | BORE SHAPE | STRAIGHT |
| MATT | MATERIAL | RETAINER STEEL COMP 410 |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD SINGLE MATERIAL RESPONSE AISI OR ASSN STD SINGLE MATERIAL RESPONSE SAE J405 UNS S41000 |
| STYL | STYLE DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION CONTROL 13499-309-1595-000 AND MANUFACTURERS SPECIFICATION CONTROL 10138-10131-302 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.0448 AND INCHES MAXIMUM 0.0550 |
| AEPR | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 0.2334 AND INCHES MAXIMUM 0.2344 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 0.0230 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE AISI OR ASSN STD SINGLE MATERIAL RESPONSE SAE J405 UNS S44004 |
| AGZC | LOAD DIRECTION | RADIAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE AISI OR ASSN STD SINGLE MATERIAL RESPONSE SAE J405 UNS S44004 |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0002 AND INCHES MAXIMUM RADIAL 0.0005 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE AISI OR ASSN STD SINGLE MATERIAL RESPONSE SAE J405 UNS S44004 |
Supersedes
This item replaces cancelled NIIN 002272191. An older drawing citing one of those numbers resolves here.