NSN 5905-00-495-4289 · NIIN 004954289 · FSC 5905
NO DASHES 5905004954289
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.453 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.500 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| AAPN | SECTION QUANTITY | 1 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING WITH PANEL SEAL |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.531 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 3 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.50 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 48.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.245 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 292.0 AND MAXIMUM 298.0 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -55 DEG CELSIUS SINGLE SECTION -3.0 TO 0.0 AND -25 DEG CELSIUS SINGLE SECTION -5.0 TO 10.0 AND 25 DEG CELSIUS SINGLE SECTION -5.0 TO 10.0 AND 120 DEG CELSIUS SINGLE SECTION -0.0 TO 3.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQTM | TERMINAL LOCATION | REAR END |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.500 |
| AEDX | SHAFT STYLE | |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.625 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
Supersedes
This item replaces cancelled NIINs 000542238 · 001193131 · 004424939 · 004921557. An older drawing citing one of those numbers resolves here.