NSN 5930-00-272-7838 · NIIN 002727838 · FSC 5930
NO DASHES 5930002727838
In Stock
SWITCH,ROTARY
Switches
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFGA | OPERATING TEMP RANGE | CELSIUS -65.0 TO 125.0 |
| AFDC | NONTURN DEVICE TYPE | AT 3:00 OCLOCK SLOTTED BUSHING |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 28.0 |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 9 |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 115.0 |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY THREADED BUSHING WITH PANEL SEAL |
| CQJX | NOMINAL THREAD SIZE | SINGLE MOUNTING FACILITY INCHES 0.375 |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPX | POLE QUANTITY | 1 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.112 AND INCHES MAXIMUM 2.378 |
| ABNB | FIRST FLAT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.270 |
| ABNC | FLAT HEIGHT | SINGLE ACTUATOR INCHES MINIMUM 0.215 AND INCHES MAXIMUM 0.221 |
| CTHF | CONTACT LOAD CURRENT RATING | DC AT SEA LEVEL AMPERES INDUCTIVE LOAD 1.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-3786 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE MOUNTING FACILITY UNEF |
| CSHW | CONTACT SWITCHING ACTION | EACH SECTION REAR BREAKS BEFORE MAKES |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 30.0 |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | SINGLE ACTUATOR INCH-POUNDS 0.500 TO 2.500 |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | SINGLE ACTUATOR FIXED STOP |
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL AMPERES RESISTIVE LOAD 2.0 AND AMPERES INDUCTIVE LOAD 1.0 |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| AAJD | THREAD CLASS | 2A |
| AKPY | THROW QUANTITY | 9 |
| ABWV | SHAFT DIAMETER | SINGLE ACTUATOR INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES MINIMUM 0.834 AND INCHES MAXIMUM 0.914 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.306 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 2 |
| CQRQ | SHAFT FLAT/SLOT ANGULAR LOCATION | SINGLE ACTUATOR DEGREES FROM NONTURN DEVICE 195.0 |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| AASA | THREAD LENGTH | SINGLE MOUNTING FACILITY INCHES MINIMUM 0.417 AND INCHES MAXIMUM 0.457 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR ROUND, FLATTED |