NSN 5305-00-591-3388 · NIIN 005913388 · FSC 5305
NO DASHES 5305005913388
In Stock
SCREW,ASSEMBLED WASHER
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTHW | PRIMARY WASHER STYLE | |
| MATT | MATERIAL | PRIMARY WASHER STEEL COMP 1050 OR STEEL COMP 1060 |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.250 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.312 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR ZINC |
| CSPG | PRIMARY WASHER OUTSIDE DIAMETER | INCHES MINIMUM 0.278 AND INCHES MAXIMUM 0.288 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.138 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | PRIMARY WASHER ROCKWELL C MINIMUM 40.0 AND ROCKWELL C MAXIMUM 50.0 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.256 AND INCHES MAXIMUM 0.270 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.072 AND INCHES MAXIMUM 0.082 |
| MATT | MATERIAL | FASTENER STEEL COMP 1010 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CTJJ | PRIMARY WASHER MATERIAL THICKNESS | INCHES NOMINAL 0.018 |
| AAVW | WASHER QUANTITY | 1 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST TREATMENT RESPONSE QQ--416,TY 1,CL 3 OR FED SPEC 2ND TREATMENT RESPONSE QQ-Z-325,TY 1,CL 3 |
Supersedes
This item replaces cancelled NIIN 010828701. An older drawing citing one of those numbers resolves here.