NSN 3110-00-858-2670 · NIIN 008582670 · FSC 3110
NO DASHES 3110008582670
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | BALL STEEL |
| AGZD | BORE SHAPE | STRAIGHT |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0005 AND INCHES MAXIMUM RADIAL 0.0009 |
| ABMK | OVERALL WIDTH | MILLIMETERS NOMINAL 7.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE A-S 6440 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER ASSN STD SINGLE MATERIAL RESPONSE A-S 6416 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER LATE |
| PRMT | PRECIOUS MATERIAL | SILVER |
| SPCL | SPECIAL TEST FEATURES | MATERIAL: OUTER RING: AMS 6440, HARDNESS: ROCKWELL C-58 MININUM OR EQUIVALENT; INNER RING: AMS 6440, HARDNESS: ROCKWELL C-58 MINIMUM OR EQUIVALENT; BALLS-AMS 6440, HARDNESS: ROCKWELL C-58 MINIMUM OR EQUIVALENT; CAGE: AMS 4616 FORGED SILICON BRONZE; SILVER PLATE AMS 2412 NO STRIKE METAL; REQUIRED BAKE: 475-500 DEGREES FAHRENHEIT FOR 2HRS TO CHECK BOND-PLATE .0005-.0015" THICK ON LAND RIDING SURFACES AND BALL POCKETS; BALLS AND RINGS MUST BE STABILIZED FOR MINIMUM DISTORTION AT 400 DEGREES FAHRENHEIT |
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE A-S 6440 |
| FEAT | SPECIAL FEATURES | ITEM OF SUPPLY IS ESSENTIAL TO WEAPON SYSTEM PERFORMANCE AND OPERATION. A FAILURE COULD CAUSE CATASTROPHIC OR CRITITCAL FAILURE RESULTING IN THE LOSS OF OR SERIOUS DAMAGE TO THE AIRCRAFT OR WEAPON SYSTEM OR AN UNCOMMANDED ENGINE SHUTDOWN THAT JEOPARDIZES SAFETY.ACTION ID 45584969 |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| ABXV | BORE DIAMETER | MILLIMETERS NOMINAL 17.0000 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | RADIAL |
| ADGA | OVERALL OUTSIDE DIAMETER | MILLIMETERS NOMINAL 30.0000 |
| MATT | MATERIAL | RETAINER COPPER ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE SAE 5100 |
Supersedes
This item replaces cancelled NIINs 001250636 · 008290567 · 012880990. An older drawing citing one of those numbers resolves here.