NSN 4720-01-383-2247 · NIIN 013832247 · FSC 4720
NO DASHES 4720013832247
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.000 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 250.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.500 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.480 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 12.000 |
| AEPR | FLANGE OUTSIDE DIAMETER | SECOND END INCHES NOMINAL 1.480 |
| AHNC | CONNECTION STYLE | |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL CORROSION RESISTING |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 16000.0 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 1.000 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.000 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 4000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 60.000 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY LAID STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END NPT |
| THSD | THREAD SERIES DESIGNATOR | SECOND END NPT |