NSN 3040-01-166-6779 · NIIN 011666779 · FSC 3040
NO DASHES 3040011666779
In Stock
SHAFT,SHOULDERED
Miscellaneous Power Transmission Equipment
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 12.250 |
| ABKZ | EXTERNAL KEYWAY LENGTH | SECOND END INCHES NOMINAL 6.500 |
| AMDL | FIRST END DIAMETER | INCHES MINIMUM 9.6200 AND INCHES MAXIMUM 9.6250 |
| AMER | FIRST END INTERNAL THREAD LENGTH | INCHES NOMINAL 0.875 |
| AMFR | SECOND END KEYWAY WIDTH | INCHES MINIMUM 0.5000 AND INCHES MAXIMUM 0.5030 |
| AMFT | SECOND END KEYWAY DEPTH | INCHES MINIMUM 0.276 AND INCHES MAXIMUM 0.277 |
| AMFZ | SECOND END DIAMETER | INCHES MINIMUM 3.9350 AND INCHES MAXIMUM 3.9360 |
| AMHP | SECOND END INTERNAL THREAD LENGTH | INCHES NOMINAL 0.750 |
| ATPC | STEP QUANTITY | 3 |
| CSPY | LARGEST STEP DIAMETER | INCHES MINIMUM 11.605 AND INCHES MAXIMUM 11.645 |
| CSYM | SURFACE FINISH | MICROINCHES 125.0 |
| FEAT | SPECIAL FEATURES | BORE LG OF SHAFT,2.125 IN. DIA;COUNTERBORE BOTH ENDS,2.187/2.188 IN. DIA,2.020 IN. DP;FIRST END HAS ONE ADDITIONAL,IDENT,INT THD HOLE,BOTH HOLES EQUALLY SPACED ON A 6.000 IN. BOLT CIR DIA;SECOND END HAS THREE ADDITIONAL,IDENT,INT THD HOLES,ALL FOUR HOLES EQUALLY SPACED ON A 3.250 IN. BOLT CIR DIA |