NSN 4720-00-122-4204 · NIIN 001224204 · FSC 4720
NO DASHES 4720001224204
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED STEEL WIRE |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.985 AND INCHES MAXIMUM 1.040 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.312 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 12.000 |
| AEPR | FLANGE OUTSIDE DIAMETER | FIRST END INCHES NOMINAL 2.000 |
| AEPR | FLANGE OUTSIDE DIAMETER | SECOND END INCHES NOMINAL 1.750 |
| AHNC | CONNECTION STYLE | |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END RECESSED FLANGE |
| AWLS | CONNECTION TYPE | SECOND END RECESSED FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 2000.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 4000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 39.000 |
| CTCJ | FLANGE STYLE | |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| ABMD | RECESS DIAMETER | SECOND END INCHES NOMINAL 0.875 |
| ABMH | RECESS DEPTH | FIRST END INCHES NOMINAL 0.125 |
| ABMH | RECESS DEPTH | SECOND END INCHES NOMINAL 0.125 |
| ABMD | RECESS DIAMETER | FIRST END INCHES NOMINAL 1.937 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 1.516 AND INCHES MAXIMUM 1.609 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.312 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 193407-0 | 30157 |