NSN 4720-00-164-4046 · NIIN 001644046 · FSC 4720
NO DASHES 4720001644046
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.750 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.250 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 9.500 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AWLS | CONNECTION TYPE | FIRST END THREADED EXTERNAL PIPE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 9000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 2250.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 30.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 4500.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND COLD RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 30.000 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE HYDRAULIC FLUID |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER BRAIDED COTTON CORD |
| THSD | THREAD SERIES DESIGNATOR | FIRST END NPTF |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE J517,100R2,TYE A,SIZE 3 TO 4 |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12C12MS30IN | 63906 |
| 007612390 | 66654 |
| 12C12MS30IN | 70434 |
| 12C12MS30IN | 73842 |
| 612390 | 77237 |
| 02512E112112-03000 | 79470 |
| 52512A112112-03000 | 79470 |
| 52512-112112-30 | 79470 |
| 12C12MS30IN | 80713 |
| 02512E112112-03000 | 01276 |
| H1EC12-12MBX12MB30 | 13174 |
| 612390 | 12603 |
| 9425-30 | 13174 |
| 9425-3 | 13174 |
| 007612390 | 16662 |
Supersedes
This item replaces cancelled NIIN 008787687. An older drawing citing one of those numbers resolves here.