NSN 4720-00-188-8314 · NIIN 001888314 · FSC 4720
NO DASHES 4720001888314
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 4000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.875 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.875 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.562 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 250.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.797 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.000 |
| ADJS | EXTERIOR COLOR | NATURAL |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 270.0 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CRSM | VACUUM IN TORR | 76.2 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES; 81349, 98441, 00624 AND 97499 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS MATERIAL PRIOR TO 1984;THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 97499-70-009 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 32.375 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-DTL-83796/1 | 81349 |
| M83796/1J323K54 | 81349 |
| 156D539-10D-0323-270 | 98441 |
| 156F539-10D0323-270 | 98441 |
| 70-009K270W323 | 97499 |
| 270-624157-10D0323 | 00624 |
| 640058K270W0323 | 00624 |
Supersedes
This item replaces cancelled NIIN 004070583. An older drawing citing one of those numbers resolves here.