NSN 4720-00-289-7988 · NIIN 002897988 · FSC 4720
NO DASHES 4720002897988
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, NATURAL AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.000 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 1.000 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT 388.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.625 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL PIPE |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 1250.0 |
| CMLP | THREAD QUANTITY PER INCH | 11-1/2 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END COMPLETE FITTING STEEL |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END NIPPLE CADMIUM |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | SECOND END COMPLETE FITTING CADMIUM |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, NATURAL OR MOLDED RUBBER, SYNTHETIC |
| AWLS | CONNECTION TYPE | SECOND END THREADED EXTERNAL PIPE |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.000 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 200.0 |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS NUT STEEL |
| THSD | THREAD SERIES DESIGNATOR | SECOND END NPT |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL EXCLUDING END FITTINGS 300.000 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, NATURAL OR SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE STEAM |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END NPT |
| AKUU | END CONNECTION DESIGN | SECOND END STRAIGHT |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AA59159-1A325 | 58536 |
| A-A-59159 | 58536 |
| M285961A325 | 81349 |
| MIL-H-28596 | 81349 |
Supersedes
This item replaces cancelled NIIN 008984055. An older drawing citing one of those numbers resolves here.