NSN 4720-00-515-0314 · NIIN 005150314 · FSC 4720
NO DASHES 4720005150314
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 1.750 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES MINIMUM 0.266 AND INCHES MAXIMUM 0.276 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES MINIMUM 0.266 AND INCHES MAXIMUM 0.276 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.015 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.188 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.015 |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 1.854 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 1.510 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.937 |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1200.0 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 300 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 600.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 90.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | CONVOLUTED |
| CRXX | MEASURING METHOD AND LENGTH | INCHES MINIMUM WORKING 37.750 AND INCHES MAXIMUM WORKING 38.250 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.656 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.312 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 1.656 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.312 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 2.188 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 1.750 |
| CTCJ | FLANGE STYLE | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 1P322, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 5.000 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 233.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.312 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.297 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.297 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 350.0 |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6851398 | 1P322 |
| AE703290-1 | 1P322 |
| R27778 | 50599 |
| 6851398 | 63005 |
| 6851398 | 73342 |
| 96772 | 78570 |
| 6851398 | 78570 |
| 4720PL0947200 | 9009H |
| 3130517-1 | 98441 |
| 3130-517 | 98441 |
| 6851398 | 98441 |
| 3162517-1 | 98441 |
| AE703290-1 | 00624 |
Supersedes
This item replaces cancelled NIINs 004765984 · 004694238. An older drawing citing one of those numbers resolves here.