NSN 4720-00-540-1332 · NIIN 005401332 · FSC 4720
NO DASHES 4720005401332
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 3.000 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.328 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.020 |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 2.750 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SPLIT |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 3.000 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 350.0 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.359 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.000 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 13.100 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 2.375 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 2.375 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.812 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 200.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED STEEL WIRE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1400.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 32.000 |
| CTCJ | FLANGE STYLE | |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER RUBBER IMPREGNATED FABRIC |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 700.0 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 65-1202 | 81205 |