NSN 4720-00-554-7983 · NIIN 005547983 · FSC 4720
NO DASHES 4720005547983
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | ALL ENDS NIPPLE ANODIZE |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END NIPPLE CADMIUM AND NIPPLE ZINC |
| AAJD | THREAD CLASS | 3B |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | SECOND END NUT CADMIUM AND NUT ZINC |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 16000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| AKXL | END FITTING COMPONENT AND MATERIAL | SECOND END NUT STEEL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.212 AND INCHES MAXIMUM 0.244 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER RUBBER IMPREGNATED COTTON FABRIC |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS NIPPLE ALUMINUM ALLOY |
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END NIPPLE STEEL |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER RUBBER IMPREGNATED COTTON FABRIC |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 160.0 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 27.000 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 5.750 |
| AHNC | CONNECTION STYLE | |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS28759-4-0270 | 32142 |
| MIL-DTL-8790 | 81349 |
| MS28759-40270 | 96906 |
| MS28759-4-0270 | 14798 |
Supersedes
This item replaces cancelled NIIN 005550647. An older drawing citing one of those numbers resolves here.