NSN 4720-00-574-6530 · NIIN 005746530 · FSC 4720
NO DASHES 4720005746530
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE HYDRAULIC FLUID, WATER BASE AND FUEL/OIL, HYDROCARBON |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.750 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 9000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 2250.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 30.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 4500.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 108.000 |
| CTCJ | FLANGE STYLE | |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.562 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 1.219 AND INCHES MAXIMUM 1.281 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 9.500 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.032 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 2.062 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 3.125 |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SPLIT |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END NPTF |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.406 |
| AWLS | CONNECTION TYPE | FIRST END THREADED EXTERNAL PIPE |
| FEAT | SPECIAL FEATURES | 9 IN. OPEN AND CLOSE WOUND SPRING GUARD ON 1ST END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.218 |
| AHNC | CONNECTION STYLE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12C16SF45-12MS108-00 | 63906 |
| 12C16SF45-12MS108-00 | 70434 |
| 12CSF45-12MS108-00 | 73842 |
| 7948 | 99984 |