NSN 4720-00-585-7305 · NIIN 005857305 · FSC 4720
NO DASHES 4720005857305
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 400.0 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 200.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END NUT CADMIUM |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1250.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| SCMP | ITEM STRUCTURAL COMPOSITION | SEVENTH LAYER SHEET RUBBER |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 11.500 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIFTH LAYER SHEET RUBBER |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.250 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -45.0 AND FAHRENHEIT 160.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.468 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.000 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS NIPPLE ALUMINUM ALLOY |
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END NUT STEEL |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | ALL ENDS NIPPLE ANODIZE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY LAID STEEL WIRE |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 88044-AN6270 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AN6270-4-11 1-2 | 50599 |
| AN6270-4D-0114 | 50599 |
| AN6270-4D-0114 | 88044 |
| AN6270-4D-0114 | 98441 |
| 193000-4D-0114 | 98441 |
| AN6270-4D-0114 | 00624 |
| 365640 | 06848 |
| AN6270-4D-0114 | 14798 |
Supersedes
This item replaces cancelled NIIN 002026037. An older drawing citing one of those numbers resolves here.