NSN 4720-00-618-2597 · NIIN 006182597 · FSC 4720
NO DASHES 4720006182597
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.153 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 17.000 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ABKU | FLANGE THICKNESS | FIRST END INCHES MINIMUM 0.363 AND INCHES MAXIMUM 0.395 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 640.0 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 120 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 240.0 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.020 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 2.375 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES MINIMUM 2.370 AND INCHES MAXIMUM 2.380 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 3.000 |
| CTCJ | FLANGE STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.812 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 160.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 3.000 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES MINIMUM 0.266 AND INCHES MAXIMUM 0.276 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 2.750 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 202.250 |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED COTTON CORD |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 147-51032-31 | 79470 |
| 10-20051-512 | 81205 |
| 10-20051 | 81205 |
| 647027-36 | 00624 |
| 647027 | 00624 |
| 147-51032-31 | 14798 |