NSN 4720-00-672-9814 · NIIN 006729814 · FSC 4720
NO DASHES 4720006729814
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CBBL | FEATURES PROVIDED | INTERNAL SUPPORT |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 2.188 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.188 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | W/TWO STEEL CLAMPS |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 00624, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT (UNJ) |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.875 |
| AECS | BOLT HOLE QUANTITY | 4 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 32.000 |
| ADJS | EXTERIOR COLOR | NATURAL |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.297 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.266 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.312 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 300.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 600.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 100.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 7.375 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 78.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.656 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.656 |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.234 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 156716H320D078 | 98441 |
| 131037-16D0320 | 98441 |
| 156716H0320D78 | 98441 |
| 755235-1 | 98897 |
| 131037-16D0320-78 | 98441 |
| 131037 | 98441 |
| 078-624176M0320 | 00624 |