NSN 4720-00-715-1666 · NIIN 007151666 · FSC 4720
NO DASHES 4720007151666
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 5.000 |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE J517,100R2,TYE A |
| THSD | THREAD SERIES DESIGNATOR | FIRST END NPTF |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.375 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.812 AND INCHES MAXIMUM 0.875 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 63.500 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; SUPPLIED W/PIPE ADAPTER,STEEL CADMIUM OR ZINC PLATED,HAVING 3/8 IN. NPTF THDS ON FEMALE END AND 1/4 IN. NPSM THDS ON MALE END |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE HYDRAULIC FLUID, WATER BASE AND FUEL/OIL, HYDROCARBON |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING CADMIUM |
| AWLS | CONNECTION TYPE | FIRST END THREADED EXTERNAL PIPE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 16000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.375 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 4000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 30.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 60C6UMS6MS63 1-2 | 63906 |
| 6C6UMS6MS63 1-2 | 70434 |
| 6C6UMS6MS63 1-2 | 73842 |
| 58895-63 1-2 | 12472 |
| 58895 | 12472 |