NSN 4720-00-720-2050 · NIIN 007202050 · FSC 4720
NO DASHES 4720007202050
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSM | VACUUM IN TORR | 50.8 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 4000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 2000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 34.000 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE AIR AND FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S28741 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.406 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 250.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.766 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.625 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | SIZE 8 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-H-8795 | 81349 |
| MIL-DTL-8795 | 81349 |
| AN6271-8-34 | 88044 |
| AN6264-8-34 | 88044 |
| MS28741-8-0340 | 96906 |
| 111417-8D-0340 | 98441 |