NSN 4720-00-720-4066 · NIIN 007204066 · FSC 4720
NO DASHES 4720007204066
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 50.000 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE AIR AND FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED STEEL WIRE |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.031 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 6.500 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND OIL RESISTANT AND MILDEW RESISTANT AND COLD RESISTANT |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.562 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 200.0 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 12.0 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S28762 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.562 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | SECOND END SOCKET ANODIZE |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END NUT CADMIUM |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | ALL ENDS NIPPLE CADMIUM |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS NIPPLE STEEL |
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END NUT STEEL |
| AKXL | END FITTING COMPONENT AND MATERIAL | SECOND END SOCKET ALUMINUM ALLOY |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-DTL-8790 | 81349 |
| MS28762-100500 | 96906 |
| 27385 | 97324 |