NSN 4720-00-731-2804 · NIIN 007312804 · FSC 4720
NO DASHES 4720007312804
In Stock
HOSE ASSEMBLY,METALLIC
Hose and Flexible Tubing
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 240.0 |
| CTCJ | FLANGE STYLE | |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.808 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 1.808 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 18.750 |
| ADJL | INNER CONVEYING TUBE STYLE | |
| ADJS | EXTERIOR COLOR | NATURAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.808 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 2.460 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 60.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.290 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END PLAIN FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.460 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 9.000 |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.380 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.360 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 120.0 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.808 |
| AHNC | CONNECTION STYLE | |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.266 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.266 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 2.460 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.460 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.360 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A200017 | 60535 |
| S22924-1812 | 78570 |
| 10-20084-506 | 81205 |
| SK-H865171-A | 96142 |
| 106191 | 96142 |
| SK-H865171-A | 98769 |
| BH738 | 08484 |