NSN 4720-00-731-5333 · NIIN 007315333 · FSC 4720
NO DASHES 4720007315333
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING CADMIUM |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.750 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY WRAPPED STEEL FABRIC |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE J517,100R9,YE A-81343 |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL SPRING GUARD, FLAT STEEL COIL , INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; WITH 2 PLASTIC PROTECTIVE CAP PLUGS |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE HYDRAULIC FLUID |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRALLY WRAPPED STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY WRAPPED STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY WRAPPED STEEL FABRIC |
| AAJD | THREAD CLASS | 2B |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.239 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 9.500 |
| ADJS | EXTERIOR COLOR | BLACK |
| AHNC | CONNECTION STYLE | |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 32.000 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.