NSN 4720-00-787-0550 · NIIN 007870550 · FSC 4720
NO DASHES 4720007870550
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.750 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION -IL -IL-H-27267 SIZE 8 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | SECOND END SOCKET CADMIUM |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| AKXL | END FITTING COMPONENT AND MATERIAL | SECOND END SOCKET STEEL |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | ALL ENDS NIPPLE ANODIZE |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END NUT CADMIUM |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS NIPPLE ALUMINUM ALLOY |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.406 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT |
| CRSM | VACUUM IN TORR | 50.8 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 6.875 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.562 |
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END NUT STEEL AND NUT ALUMINUM ALLOY |
| AHNC | CONNECTION STYLE | |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| CQRB | SEAT ANGLE | FIRST END DEGREES 12.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 12.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.625 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 400.0 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| R9806-8-0067 | 50599 |
| 50-076-8-0067 | 72429 |