NSN 4720-00-834-2680 · NIIN 008342680 · FSC 4720
NO DASHES 4720008342680
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 14000.0 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL CORROSION RESISTING |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING PASSIVATE |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.407 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 400.0 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC AS604-81343 AND PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 81343-AS621 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 12.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| ABKV | OUTSIDE DIAMETER | INCHES MAXIMUM 0.715 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.880 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | SIZE 8 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 28.750 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 21060608-0290 | 48151 |
| 66060608-0290 | 78570 |
| 23060608-0290 | 78570 |
| 21060608-0290 | 78570 |
| AS604 | 81343 |
| AS621-08-0286 | 81343 |
| MS27369H0290 | 96906 |
| 170141-8CRL-0286 | 98441 |
| SAE-AS604 | 0U583 |
| AS604 | 0U583 |
| AS621-08-0286 | 0U583 |
Supersedes
This item replaces cancelled NIIN 008151635. An older drawing citing one of those numbers resolves here.