NSN 4720-00-885-4083 · NIIN 008854083 · FSC 4720
NO DASHES 4720008854083
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 12.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 12.0 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.391 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.585 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.625 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRSM | VACUUM IN TORR | 50.8 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 13.125 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.750 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 78570, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
Cross-references
18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 37C300333P102 | 24446 |
| 3005T95P01 | 24446 |
| 37C300333P101 | 24446 |
| 300ST95P02 | 24446 |
| R9806NF-8-0131 | 50599 |
| 13061508-0131F | 78570 |
| 95789 | 78570 |
| S204 | 98441 |
| F204 | 98441 |
| 3005T51P02 | 99207 |
| 37C300333P101 | 99207 |
| 3005T51P01 | 99207 |
| 300ST95P02 | 99207 |
| 3005T95P01 | 99207 |
| 3005T51P03 | 99207 |
| 37C300333P102 | 99207 |
| 3005T51P01 | 03350 |
| 3005T51P01 | 07482 |
Supersedes
This item replaces cancelled NIIN 000665811. An older drawing citing one of those numbers resolves here.