NSN 4720-00-904-2320 · NIIN 009042320 · FSC 4720
NO DASHES 4720009042320
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 9000.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 1.219 AND INCHES MAXIMUM 1.281 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 5.000 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 1.062 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT AND MILDEW RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 73.000 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED WIRE |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UN |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | CLASS A AND TYPE 2 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 4500.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 2250.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| AAJD | THREAD CLASS | 2B |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.781 |