NSN 4720-00-909-1984 · NIIN 009091984 · FSC 4720
NO DASHES 4720009091984
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 2.188 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 1.750 |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 1.750 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.266 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.205 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.018 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.018 |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 1.884 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.188 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRSM | VACUUM IN TORR | 50.8 |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 4000.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 250.0 |
| ADJS | EXTERIOR COLOR | NATURAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.656 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.312 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 1.656 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.312 |
| AECS | BOLT HOLE QUANTITY | 4 |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 1.500 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 25.500 |
| CTCJ | FLANGE STYLE | |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END STRAIGHT |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.875 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 250.0 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.297 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.297 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 7.375 |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES,50599,98441 AND 78570 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.031 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| R22732 | 50599 |
| R22732-2 | 50599 |
| S72A90003160254 | 79470 |
| 95541 | 78570 |
| 124656-16D-0254 | 98441 |
| 751392-101 | 98897 |
| 751392 | 98897 |
| S72A90003160254 | 14798 |