NSN 4720-00-913-1183 · NIIN 009131183 · FSC 4720
NO DASHES 4720009131183
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.220 |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 2.750 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 16000.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 4000.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.220 |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY WRAPPED STEEL FABRIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE AIR AND FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY WRAPPED STEEL FABRIC |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.000 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.560 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.560 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.750 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 12.000 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.031 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.031 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY WRAPPED STEEL FABRIC |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.406 |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRALLY WRAPPED STEEL FABRIC |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 2.062 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 2.062 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 2.750 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 49.000 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.375 |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 1.750 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 1.750 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SPLIT |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SPLIT |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.406 |
| AHNC | CONNECTION STYLE | |
| CTCJ | FLANGE STYLE | |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.375 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 565146 | 40152 |
| 16S4-16FC3-16FC3-60DEG49IN | 63906 |
| 16MSC-16SF-16SF 60DEG49IN | 63906 |
| 16S4-16FC3-16FC3-60DEG49IN | 70434 |
| 16MSC-16SF-16SF-60DEG49IN | 70434 |
| 16S4-16FC3-16FC3-60DEG49IN | 73842 |
| 16MSC-16SF-16SF-60DEG49IN | 73842 |
| 565146 | 77237 |
| FL1829MMM0490 | 01276 |