NSN 4720-00-916-9055 · NIIN 009169055 · FSC 4720
NO DASHES 4720009169055
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.562 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 16.000 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SOURCE CONTROL 07482-J263D0160AB |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND NUTS DRILLED FOR LOCKWIRE |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 07482-J263 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.298 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MAXIMUM 0.469 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.000 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 6500.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.562 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| R50205GCCA6-0160 | 50599 |
| 13000106-0160H | 78570 |
| 530108H0160B | 00624 |
| J263D0160AB | 07482 |
| J263D0160CB | 07482 |
| J263D0160BB | 07482 |
| J263D0160DB | 07482 |
Supersedes
This item replaces cancelled NIIN 004926053. An older drawing citing one of those numbers resolves here.