NSN 4720-00-917-3831 · NIIN 009173831 · FSC 4720
NO DASHES 4720009173831
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
| ADJS | EXTERIOR COLOR | NATURAL |
| ABKV | OUTSIDE DIAMETER | INCHES MAXIMUM 0.343 |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.173 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 07482-J264 |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.438 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | CLASS 1 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -67.0 AND FAHRENHEIT 450.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SOURCE CONTROL 07482-J264B0184AB |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 18.500 |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND NUTS DRILLED FOR LOCKWIRE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 7000.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 124002-4CL-0184 | 50599 |
| R50206GCCA4-0184 | 50599 |
| 13000204-0184H | 78570 |
| MIL-H-25579 | 81349 |
| MIL-DTL-25579 | 81349 |
| MS8005E184CL | 96906 |
| J264B0184CB | 07482 |
| J264B0184BB | 07482 |
| J264B0184AB | 07482 |
Supersedes
This item replaces cancelled NIIN 010120013. An older drawing citing one of those numbers resolves here.