NSN 4720-00-948-0129 · NIIN 009480129 · FSC 4720
NO DASHES 4720009480129
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHNC | CONNECTION STYLE | |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 7.000 |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS AND NONSKIVE |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 2000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 4000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAJD | THREAD CLASS | 3B |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON AND AIR AND WATER, FRESH |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-1550309 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED STEEL WIRE |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 38.900 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| ADJS | EXTERIOR COLOR | BLACK |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 250.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.781 AND INCHES MAXIMUM 0.844 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.523 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 4210606-8-8-8-39 | 59524 |
| 4210606-8-8-8-39.00 | 87373 |
| F4220606-8-8-8-39.00 | 87373 |
| 4210606-8-8-8-39 | 98441 |
| 4210606-8-8-8-39.00 | 98441 |
| 1550309PT11 | 10001 |
| 2697779-0009-0390 | 10001 |
| 1550309PC11 | 10001 |