NSN 4720-00-992-5182 · NIIN 009925182 · FSC 4720
NO DASHES 4720009925182
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
49 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CRFY | FLOW ANGLE | FIRST END DEGREES 90.0 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 5000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ACID RESISTANT AND ALCOHOL RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND SOLVENT RESISTANT AND SALT WATER RESISTANT |
| CRSM | VACUUM IN TORR | 254.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 39.000 |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.205 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.093 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 1.156 |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.625 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -67.0 AND FAHRENHEIT 450.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.375 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.789 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS FLANGE STEEL COMP 304 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.156 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 1.610 |
| CTCJ | FLANGE STYLE | |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END NUT STEEL COMP 304 |
| AKXL | END FITTING COMPONENT AND MATERIAL | FOURTH END NIPPLE STEEL |
| AKXL | END FITTING COMPONENT AND MATERIAL | SECOND END SOCKET STEEL COMP 304 |
| AKXL | END FITTING COMPONENT AND MATERIAL | THIRD END UNION STEEL COMP 304 |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | ALL ENDS NIPPLE PASSIVATE |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END NUT PASSIVATE |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | THIRD END SOCKET PASSIVATE |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.156 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 1.610 |
| AHNC | CONNECTION STYLE | |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 317.0 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 6.500 |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-H-25579 | 50599 |
| MIL-H-25579 | 78570 |
| MIL-H-25579 | 81349 |
| MIL-H-25579 | 98441 |
| MIL-H-25579 | 00624 |
| MIL-H-25579 | 14798 |