NSN 4720-01-033-2808 · NIIN 010332808 · FSC 4720
NO DASHES 4720010332808
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.250 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.625 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 8.000 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING COPPER ALLOY |
| AWLS | CONNECTION TYPE | FIRST END THREADED EXTERNAL PIPE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 800.0 |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED TEXTILE YARN OR 1ST LAYER WOVEN FABRIC OR 2ND LAYER SPIRALLY LAID STEEL WIRE OR OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.250 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 200.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 400.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT AND WATER RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 600.000 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE GAS AND HYDRAULIC FLUID |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED TEXTILE YARN OR WOVEN FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY LAID STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END NPT |