NSN 4720-01-033-7861 · NIIN 010337861 · FSC 4720
NO DASHES 4720010337861
In Stock
HOSE ASSEMBLY,METALLIC
Hose and Flexible Tubing
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.500 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT 400.0 |
| ABKG | BOLT CIRCLE DIAMETER | SECOND END INCHES NOMINAL 3.125 |
| ABKG | BOLT CIRCLE DIAMETER | FIRST END INCHES NOMINAL 3.875 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.500 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.500 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.359 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 13.000 |
| ADJL | INNER CONVEYING TUBE STYLE | |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 105.0 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AEPR | FLANGE OUTSIDE DIAMETER | SECOND END INCHES NOMINAL 4.250 |
| AEPR | FLANGE OUTSIDE DIAMETER | FIRST END INCHES NOMINAL 5.000 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.625 |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.625 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.133 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.140 |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 2.875 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 2.000 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 400.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 100.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 200.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 31.500 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | A 90 DEG ELBOW IS LOCATED 16.031 IN. FROM FIRST END AND 15.469 IN. FROM SECOND END |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED NICKEL COPPER ALLOY WIRE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S1725 | 96103 |