NSN 4720-01-101-4623 · NIIN 011014623 · FSC 4720
NO DASHES 4720011014623
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.250 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.875 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.875 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.000 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 18.000 |
| ADJS | EXTERIOR COLOR | BLACK |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.188 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.188 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 2.313 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 2.313 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 3.125 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 3.125 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.391 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.391 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.469 |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.469 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AWLS | CONNECTION TYPE | FIRST END PLAIN FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 60.000 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER BRAIDED WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED TEXTILE YARN |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER BRAIDED WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIFTH LAYER BRAIDED WIRE |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| D-104686 PART 10 | 3X894 |
| 20SL4-20SF90-20SF-0-60IN | 63906 |
| 430-20-20-SA20590A60 | 62727 |
| 20SL4-20SF-20SF90-60IN | 63906 |
| 20SL4-20SF-20SF90-60IN | 70434 |
| 20SL4-20SF90-20SF-0-60IN | 70434 |
| 20SL4-20SF-20-SF90-60IN | 73842 |
| 20SL4-20SF90-20SF-0-60IN | 73842 |
| 20SL4-20SF90-20SF-0-60IN | 04NP0 |
| 20SL4-20SF-20-SF90-60IN | 04NP0 |
| M720-HW20-20PA-AW20-20PA90A/L60 | 13174 |
| D-104686 | 16603 |
| D-104686 PART 10 | 16603 |