NSN 4720-01-141-7802 · NIIN 011417802 · FSC 4720
NO DASHES 4720011417802
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.812 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 160.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.188 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.188 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 2.153 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 17.000 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 130.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 2.375 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 2.375 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 2.375 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 2.375 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 3.000 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 3.000 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 3.000 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 3.000 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.328 |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.328 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING ALUMINUM ALLOY |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING PASSIVATE |
| AWLS | CONNECTION TYPE | FIRST END PLAIN FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 640.0 |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR 1ST LAYER BRAIDED COTTON CORD OR OUTER LAYER BRAIDED COTTON CORD |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 120.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 240.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 19.180 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, BUNA-N |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR BRAIDED COTTON CORD |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED COTTON CORD |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 10-20051 | 81205 |
| 10-20051-510 | 81205 |
| 147-51066-1 | 14798 |
| 147-51066-01 | 14798 |