NSN 4720-01-143-1406 · NIIN 011431406 · FSC 4720
NO DASHES 4720011431406
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: A/M27T-5/-7 PORTABLE HYDRAULIC POWER SUPPLY, GROUND SUPPORT EQUIPMENT FOR THE F/A-18 HORNET AIRCRAFT
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.750 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.438 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 11.000 |
| ADJS | EXTERIOR COLOR | BLACK |
| AGAV | END ITEM IDENTIFICATION | A/M27T-5/-7 PORTABLE HYDRAULIC POWER SUPPLY, GROUND SUPPORT EQUIPMENT FOR THE F/A-18 HORNET AIRCRAFT |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 20000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 5000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 10000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 13.625 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE; WEAPON SYSTEM ESSENTIAL |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRAL INTERLOCKED RAYON |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE J517,100R10,TYE A-81343 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12C10-12FJX13 5/8 | 24161 |
| 68A4-C263-1 | 30003 |
| 68A4-C263 | 30003 |
| 432-12-12FJX-12FJX-13 5/8 | 62747 |
| 12S4-12FJS13 5/8 | 63906 |
| 12S4-12FJS13 5/8 | 70434 |
| 43212U-612612-01362 | 79470 |
| 43212V-612612-01362 | 79470 |
| 43212V-612-01362 | 79470 |
| 12KSL12FJ12FJ-13 5/8 | 81300 |
| A3401-1 | 98441 |