NSN 4720-01-176-5962 · NIIN 011765962 · FSC 4720
NO DASHES 4720011765962
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.750 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 250.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.250 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 9.500 |
| ADJS | EXTERIOR COLOR | BLACK |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 9000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 2250.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 4500.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 96.125 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, SILICATE-ESTER BASE AND HYDRAULIC FLUID, WATER BASE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER MOLDED RUBBER, SYNTHETIC |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE J517,100R2,TYE AT-81343 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12C2AT-12JX-12FJX-96 1/8 | 24161 |
| 185-25-2301-335 | 20418 |
| 185-25-2301 | 20418 |
| 12BXSB12FJ12FJ-96 1/8 | 81300 |
| F3020606-12-12-12-96.125 | 87373 |
| F3010606-12-12-12-96.125 | 87373 |
| F3010606-12-12-12-96 1/8 | 98441 |
| F3010606-12-12-12-96.13 IN | 98441 |
| F3010606-12-12-12-96.125 | 98441 |
| J4HA1212NJ12NJ-96 1/8 | 13174 |