NSN 4720-01-204-8381 · NIIN 012048381 · FSC 4720
NO DASHES 4720012048381
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.485 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -67.0 AND FAHRENHEIT 450.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.015 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 6.500 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 270.0 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL CORROSION RESISTING |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 1.062 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 10.875 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UN |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 81343-AS157 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS157 | 81343 |
| AS157K107-270 | 81343 |
| MS27367K0107270 | 96906 |
| AE3009K0107-270 | 00624 |
| AS157K107-270 | 0U583 |
| AS157 | 0U583 |
| SAE-AS1339 | 0U583 |