NSN 4720-01-260-7314 · NIIN 012607314 · FSC 4720
NO DASHES 4720012607314
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.750 AND INCHES MAXIMUM 0.797 |
| ABJH | TEMP RATING | SINGLE RESPONSE CELSIUS -40.0 AND CELSIUS 93.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 1.406 AND INCHES MAXIMUM 1.469 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 11.000 |
| ADJS | EXTERIOR COLOR | BLACK |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 20000.0 |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.062 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 5000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 10000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND COLD RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 8.000 |
| FEAT | SPECIAL FEATURES | END FITTING MATL COMP 12L14 STEEL ASTM A108 OR SAE J403 UNS G12144 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON AND GAS AND HYDRAULIC FLUID AND HYDRAULIC FLUID, WATER BASE AND OIL, LUBRICATING, DIESTER BASE AND WATER |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY LAID STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER SPIRALLY LAID STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| F7220606-12-12-12-8 | 87373 |
| 3410606-12-12-12-8 | 87373 |
| SJ12-24812-SJ12-8 | 98441 |
| 248-12-SJ12-SJ-12-8 | 98441 |
| 3410606-12-12-12-8 | 98441 |
| 150808-12-8 | 01276 |
| A150808-12-8 | 01276 |
| FG1089HHH0080 | 01276 |