NSN 4720-01-287-2473 · NIIN 012872473 · FSC 4720
NO DASHES 4720012872473
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.485 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 400.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.905 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 6.500 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL CORROSION RESISTING |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.875 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 12.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 40.750 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, TETRAFLUOROETHYLENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIFTH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE AS604,SIZE 10-81343 AND PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 81343-AS621 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 66060610-0406 | 78570 |
| AS621-10-0406 | 81343 |
| AS604 | 81343 |
| 170141-10CR-0411 | 98441 |
| MS27369J0406 | 96906 |
| 170141-10CR0406 | 98441 |
| AS621-10-0406 | 0U583 |
| AS604 | 0U583 |
| SAE-AS604 | 0U583 |