NSN 4720-01-377-3028 · NIIN 013773028 · FSC 4720
NO DASHES 4720013773028
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: 1520-01-125-5476
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.750 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 250.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 1.594 AND INCHES MAXIMUM 1.719 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.500 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 305.0 |
| AGAV | END ITEM IDENTIFICATION | 1520-01-125-5476 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND SELF-SEALING |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 400.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.188 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 100.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 200.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND MILDEW RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 21.000 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, BUNA-N |
| SCMP | ITEM STRUCTURAL COMPOSITION | FOURTH LAYER BRAIDED FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER HELIX COPPER COIL |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER HELIX COPPER COIL |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UN |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 70-052KL305E210 | 97499 |
| 167060FFG0210S305 | 98441 |
| 70-052 | 97499 |
| AE3988K0210-305 | 00624 |