NSN 4720-01-411-7593 · NIIN 014117593 · FSC 4720
NO DASHES 4720014117593
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 4.050 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 400.0 |
| ABKG | BOLT CIRCLE DIAMETER | SECOND END INCHES NOMINAL 6.562 |
| ABKG | BOLT CIRCLE DIAMETER | FIRST END INCHES NOMINAL 6.562 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 1.438 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 1.438 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 4.500 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 24.000 |
| ADJS | EXTERIOR COLOR | NATURAL |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 0.0 |
| AECS | BOLT HOLE QUANTITY | 8 |
| AEPR | FLANGE OUTSIDE DIAMETER | FIRST END INCHES NOMINAL 7.688 |
| AEPR | FLANGE OUTSIDE DIAMETER | SECOND END INCHES NOMINAL 7.688 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.562 |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.562 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 4.280 |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 4.280 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 800.0 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 200.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 400.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 82.750 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | TWOHOSE ASSEMBLY CONNECTED BY 90 DEGREE ELBOW, FIRST LEG 41.000 IN. , SECOND LEG 58.750 IN. |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| WHGP-U64J-22 | 1GW19 |
| HR90-22 | 1RDT0 |
| 6373-22 | 21392 |
| 6373 | 21392 |