NSN 4720-01-415-0978 · NIIN 014150978 · FSC 4720
NO DASHES 4720014150978
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: SUPPORT EQUIPMENT (SE), B-2 BOMBER AIRCRAFT
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.187 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 275.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.313 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
| AGAV | END ITEM IDENTIFICATION | SUPPORT EQUIPMENT (SE), B-2 BOMBER AIRCRAFT |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 800.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 200.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 12.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 400.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 21.375 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 07A271 | 1W025 |
| 07A271A213G | 1W025 |
| 74001A0213G000 | 24984 |