NSN 4720-01-417-2744 · NIIN 014172744 · FSC 4720
NO DASHES 4720014172744
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: 2350-01-390-4683
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.250 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 212.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.600 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.000 |
| AGAV | END ITEM IDENTIFICATION | 2350-01-390-4683 |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING ZINC |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.438 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 24.500 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12365278-80 | 19207 |
| 1C000127-02 | 45X75 |
| 12365278-80 | 87373 |
| 12365278-80 | 01276 |
| 1C04363EEE0244A | 01276 |
| 12365278 | 06085 |
| 12365278-80 | 06085 |